Construction contractors need to be aware of several key things when looking at a building inspection report. You can avoid any potential issues later on by keeping an eye out for these red flags. Here are four things to look for.
1. Signs of Poor Workmanship
When reviewing a building inspection report, keep an eye out for any mention of poor workmanship. This can be anything from shoddy installation of fixtures and fittings to incorrect concrete mixes being used. If the report highlights any instances of poor workmanship, be sure to follow up with the relevant tradespeople to ensure that the issues are rectified before proceeding with the construction project.
2. Non-Compliance with Building Codes and Standards
Another key area to look out for on a building inspection report is any mention of non-compliance with building codes and standards. This could relate to anything from the height of handrails to the thickness of wall claddings. It's essential to ensure that all building code and standards requirements are met before proceeding with construction, as non-compliance can lead to costly delays further down the line.
3. Soil Contamination
Soil contamination is another potential issue that can crop up on a building inspection report. The previous land usually causes this issue uses, such as industrial sites or gasworks. If contaminated soil is present on the site, it will need to be dealt with before construction can begin. This process usually involves excavating and disposing of the contaminated soil, which can add significant costs to the construction project.
4. Asbestos Present on Site
Another potential hazard that can be present on a building site is asbestos. This naturally occurring mineral was once used extensively in construction due to its durability and fire-resistant properties. However, it has since been made illegal to install in many countries due to its links to serious health conditions such as lung cancer. If asbestos is present on the site, it will need to be removed by a licensed contractor.
Conclusion
Construction contractors need to be aware of several key things when looking at a building inspection report in order not to miss potential problems that could occur during or after construction takes place. You can hopefully avoid costly delays and unforeseen expenses further down the road by keeping an eye out for these red flags during the pre-construction phase. If you would like to find out more, contact a local building inspection service today.
Share
